Astra 3 Anaesthesia Machine
The Astra 3 range of Anaesthesia machines offer modern styling combined with quality and safety at an affordable price with the added benefit of low cost maintenance.
The machine is produced from plastic mouldings with an Aluminium extruded upright with a vertical Tee slot mounting system. The flowmeter is available with two or three gases with low flow cascade tubes on all gases.
Options such as flowmeter back light, Oxygen monitor and electrical sockets are available.
Description
Cygnus Anaesthesia Ventilator
- Intuitive 10.4” TFT touch screen control with large easy to read color screen. Optional 15.4” touch screen also available
- Volume, PCV, Spontaneous, PSV-plus, SIMV and SMMV modes
- Integrated Oxygen monitor with pop up key pad adjustment
- Variable orifice based Spirometry
- Electronic PEEP
- 2 hour battery backup
- Patient select initial screen
- User selectable patient weight default settings for 3, 10, 25, 50, 70 and 100kg
- User savable patient configured settings with custom naming facility – six off
- Patient setting confirm button
- Touch screen set buttons for ventilator settings
- Pop up key pads for adjusting ventilator settings – Oxygen alarm, Minute volume, Tidal volume,
- Pressure limit and Target, PEEP, Rate – BPM, and I:E Ratio
- Measured value display box
- Color coded wave forms
- Mode button display box with second row prompt arrow
- Ventilation mode select button – usable during surgical procedures with User confirm
- Mute button with 120 second delay and reset facility
- Gas mix option with pop up menu
- Language options
- Time display
- Case time with stop and reset facilities
Pneumatic Specification
- 1, 2 or 3 Station Selectatec ® backbar with integrated pressure relief valve
- Selectatec ® is a registered trademark of Datex Ohmeda
- Common gas outlet with 22 mm male taper and 15 mm female
- Pipeline Input – NIST or DISS
- Cylinder yokes for E size cylinders – 4 maximum
- Oxygen Failure device – shuts off Nitrous Oxide
- Oxygen Failure alarm – whistles when low oxygen pressure
- Oxygen and Air high pressure outlets – 3 maximum
Flowmeter Specification
- 2 or 3 gas flowmeter – Oxygen and Nitrous Oxide or Oxygen, Nitrous Oxide and Air
- Photo luminescent back light – optional
- Nitrous Oxide / Air switch – optional
- Mechanical anti hypoxic device – gear driven – 25% minimum Oxygen
- Dual flow tubes for all gases – 100 to 1000 ml and 1 to 10 liters
- EFM (Electronic Flow Monitor) option available
Be the first to review “Astra 3 Anaesthesia Machine”
Reviews
There are no reviews yet.